Makita HG6531C Manuel D'instruction page 9

MAINTENANCE AND CLEANING
Attention:
work on the equipment, pull the
power plug.
Maintenance
Your Power Tool has been designed to operate
Q
over a long period of time with a minimum of
maintenance. Continuous satisfactory opera-
tion depends upon proper tool care and regular
cleaning.
If the supply cord is damaged, it must be replaced
Q
by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
Lubrication
Your power tool requires no additional lubrication.
Q
Cleaning
To prevent overheating of the motor, keep the
Q
ventilation slots of the machine clean and free
from dust and dirt.
Regularly clean the machine housing with a soft
Q
cloth, preferably after each use. If the dirt does not
come off use a soft cloth moistened with soapy
water.
Never use solvents such as petrol,
alcohol, ammonia water, etc. These sol-
vents may damage the plastic parts.
TECHNICAL DATA
Model No:
HG6531C
Voltage 220-240V~
Power 2000W
Temperature I 50°C I 50°C
II 50-650°C II 50-650°C*
Air flow I 200-550L/M I 150-450L/M
II 200-550L/M II 150-450L/M
Overall length 257mm
Net weight 0.71kg
* NOTE: 650°C can be achieved only with the wide-slot nozzle,
overlap welding nozzle or welding nozzle.
Before performing any
HG6530V
110V~ 220-240V~ 110V~
1400W 2000W 1400W
I 50°C I 50°C
II 50-650°C II 50-650°C*
III 50-650°C III 50-650°C*
I 500L/M I 400L/M
II 280L/M II 230L/M
III 550L/M III 450L/M
257mm
0.72kg
Default setting of the preset mode
No. Application name
1 FREE SET 1
2 FREE SET 2
3 SCRINKING
4 FORMING
5 SOLDERING COPPER
6 DRYING PAINT
7 PAINT STRIPPING
8 WELDING FLOOR FOIL
9 WELDING PPEPDM
10 WELDING HDPE
11 WELDING PP
12 WELDING PVC-U
13 WELDING ABS
14 WELDING PC
ENVIRONMENT
Only for EU countries
Due to the presence of hazardous
components in the equipment, used
electrical and electronic equipment
may have a negative impact on the
environment and human health.
Do not dispose of electrical and electronic
appliances with household waste!
In accordance with the European
Directive on waste electrical and
electronic equipment and its adaptation
to national law, used electrical and
electronic equipment should be collected
separately and delivered to a separate
collection point for municipal waste,
operating in accordance with the
environmental protection regulations.
This is indicated by the symbol of the crossed-out
wheeled bin placed on the equipment.
9 English
Temperature Air volume
250°C 5
500°C 5
300°C 3
250°C 4
650°C 3
650°C 5
450°C 5
450°C 3
280°C 3
300°C 3
320°C 3
340°C 3
360°C 3
380°C 3