S&P JETLINE 100 Mode D'emploi page 14

RECYCLING
In accordance with EEC Standards and our
EN
responsibility for future generations, we are
obliged to recycle all the materials we can.
Therefore, please deposit all waste material
and packaging in their corresponding recycling
containers and hand in the replaced units to the
nearest handler of this type of waste product.
The fan unit is mainly made of steel, copper,
ferrite, aluminium and plastic. These com-
ponents should be recycling in the following
categories:
- Steel and iron
- Aluminium
- Non-ferrous metals
- Plastics
- Insulating materials
- Cables
- Electronic scrap
To clarify any questions regarding S&P prod-
ucts contact your local distributor. For its
location and to obtain the EU Declaration of
Conformity certifi ed technical data sheet and
copy of this instruction manual, see our web
site www.solerpalau.com
14
INFORMATION REQUIREMENTS FOR RVU
a Trade mark
b Identifi er
c SEC average climate (kWh/(m
SEC class
SEC cold climate (kWh/(m
SEC warm climate (kWh/(m
d Typology
e Type of drive
f Type of HRC
g Thermal effi ciency (%)
h Maximum fl ow rate (m
i Electrical power input at maximum fl ow
rate (W)
j Sound power level (LWA)
k Reference fl ow rate (m
l Reference pressure difference (Pa)
3
m SPI (W/m /h)
n Control factor
Control typology
o Maximum internal leakage for BVU (%)
Maximum external leakage for BVU and
UVU (%)
p Mixing rate for BVU without duct connec-
tion (%)
q Position of visual fi lter warning
description of visual fi lter warning
r Instructions to install supply grilles
Instructions to install exhaust grilles
s Internet address
t Airfl ow sensitivity to pressure variation
u Indoor/outdoor air tighness (m
v Annual electricity consumption - Aver-
age climat (kWh/a)
Annual electricity consumption - Warm
climat (kWh/a)
Annual electricity consumption - Cold
climat (kWh/a)
w Annual heating saved - Average climat
(kWh/a)
Annual heating saved - Warm climat
(kWh/a)
Annual heating saved - Cold climat
(kWh/a)
2 .an))
2 .an))
2
.an))
3
/h)
3
/s)
3
/h)