TEFAL Cake Factory KD8101 Mode D'emploi page 29

After cooking
Remove the support Place the support
frame from the frame on a surface
cake factory with suitable for heat
oven gloves
Melting chocolate*
Place the chocolate Remove the grid
in the aluminium
mould
To melt chocolate, use the Cake Factory non-stick aluminium mould or the PROflex chocolate
melting silicone mould (if included).
Individual dairy desserts/mousses* **
Do not put the lids on the glass pots during cooking.
Pour into the Put the aluminium
glass pots mould into the
Once the baking process is finished, remove the dish and the glass pots from the Cake Factory,
still hot, with the help of a potholder and leave to cool for 10 minutes before putting the lids on.
Dairy desserts/mousses to share*
Pour into
the aluminium aluminium mould
mould into the device
Remove the moulds
from the support
frame one by one
Close
Put the glass pots
in the aluminium
device mould
Put the Close
**accessories are sold separately (sold in a pack of 6)
Allow to cool for a
few minutes before
removing from the
mould.
Put chocolate in a Place the grid on
suitable container the reflector
Close
*Depending on model
EN
Close
29