TEFAL Cake Factory KD8101 Mode D'emploi page 28

EN
Using the Moulds
To ensure the proper operation of your appliance, when filling the moulds, do not exceed the
proportions indicated.
Silicone PROflex Mould*
The Cake Factory is only compatible with moulds belonging to the Tefal PROflex range,
dimensions 30 x 21 cm.
Pour into the mould
* To cook canelés or for any use of a mould taller than 4.5 cm, directly place the PROflex mould in the Cake
Factory without the support grid.
Non-stick aluminium bowl
Grease the bowl
Steel moulds*
Fill the moulds up to 3/4.
Pour into
steel moulds
We recommend not to mix the mould shapes in the same baking process.
28
Remove the
Ensure that the
aluminium bowl
black reflector is
properly in place
and attached to
the bottom of the
appliance
Fill the bowl Remove the grid*
Place the moulds Put the holder
into the holder into the device
Place the mould
Place the grid on
the reflector*
Insert the bowl
Ensure that the
black reflector is
properly in place
and attached to
the bottom of the
appliance
Close
Close
Close
*Depending on model