Publicité
Les langues disponibles
Les langues disponibles
Installation Instructions – HBL Wireguard
INSTALLATION
1.
Knockout pre-punched holes (4 holes total) (Figure 1.).
2.
Install clips to wireguard. Be sure clip mounting hole
lines up with K.O. (Figure 2.).
3.
Install thumb screw to clip (Figure 2.).
K.O.
Figure 1.
Figure 3.
2
4.
Line up wireguard/clip with K.O. and tighten thumb
screw until it is through the hole in the side of the
fixture endplate (Figure 3.).
5.
Repeat steps 2 to 4 for opposite side (Figure 4.).
Figure 2.
Figure 4.
Installation Instructions – HBL Wireguard
0590-F037
ADF140674
www.cooperlighting.com
Publicité
