Hornbach 10328335 Manuel D'installation Et De L'utilisateur page 141

Once the desired pitch angle
is set with the setting screw
(right), tighten the lock socket
head screw (left) with an Allen
key. Repeat the same procedure
on the other arm of the awning.
Make sure to adjust the pitch
angle evenly on both sides, so
that the front profile 2 remains
horizontal.
The awning can withstand light
rain showers if the pitch angle
is 15° or more. You can set the
angle between 15° and 25°.
However, we do not recommend
a pitch angle of less than 15°.
To set a pitch angle of 15° or
more, extract the awning to the
length of 300 cm.
The distance between level and
front profile 2 must be 75 cm
(15°) or more so that the awn-
ings can withstand light rain.
4
5
ENGLISH | 141