Hornbach 10328335 Manuel D'installation Et De L'utilisateur page 137

Mounting bracket 4x
(e.g. in concrete)
The mounting brackets must be
installed level and at least 280 cm
above the ground.
The distance between the insides
of the mounting brackets
is 27.5 cm between the two
brackets on each side and 454 cm
between the inner brackets.
Mark the installation holes of the
mounting brackets on the wall
According to your wall type,
drill the holes and install the
fastenings.
Alternatively, the mounting
brackets can be installed to
a ceiling, using its two upper
Install the mounting brackets at
the fastenings and ensure they
are securely fi xed in place.
Cassette awning 1x
After all three wall brackets
have been mounted prop-
erly you can fi x the awning. At
least two ladders or treads are
required in order to obtain the
required height.
Ensure that the ladders/treads
are fi rmly resting on the ground.
Only use ladders/treads suitable
for such assembly work.
Insert the awning into brackets
as shown in drawing on the
right. Then immediately secure
it with delivered bolts to the
brackets. Tighten the bolts
1
2
≥ 8 cm
holes.
3
1
2
3
fi rmly.
Red labels mark the mounting
position of the mounting brackets.
6 cm
6 cm
8 cm
4.5 cm
4.0 cm
2
1
3
ENGLISH | 137