Braun 5030s Mode D'emploi page 7

Our products are designed to meet the highest standards of quality, functionality and
design. Thank you for your trust in Braun's quality and we hope you enjoy your new
Braun product.
This product is for household use only.
Shaver
1 Foil & Cutter cassette
2 Cassette release button
3 MultiHeadLock switch
4 On/off switch
5 Shaver display
5a Lock symbol (travel lock)
5b Battery symbol
6 Long hair trimmer
7 Shaver-to-station contacts
8 Release button for long hair trimmer
9 Shaver power socket
10 Special cord set (design can differ)
11 Protection cap
First use and Charging
Connect the shaver to an electrical outlet by snapping the special cord set (10) into the
shaver power socket (9).
Basic operating information
• A full charge provides up to 50 minutes of cordless shaving time. This may vary
according to your beard growth and environmental temperature.
• Recommended ambient temperature for charging is 41 °F to 95 °F / 5 °C to 35 °C.
The battery may not charge properly or at all under extreme low or high temperatures.
Recommended ambient temperature for shaving is 60 °F to 95 °F / 15 °C to 35 °C.
• Do not expose the shaver to temperatures higher than 122 °F / 50 °C for extended
periods of time.
• When the shaver will be connected to an electrical outlet, it may take some minutes
until the display illuminates.
Charging / low charge
The charge status is shown in the shaver display (5).
• During charging the battery symbol (5b) will blink green.
• When the shaver is fully charged and connected to an electrical outlet, the battery
symbol will light up green for a few seconds.
• The battery symbol will flash red, when the battery is running low. You should be able
to finish your shave. With switching off the shaver a beep sound reminds of the low
charge status.
• If the shaver has run out of power (discharged), you may also shave with the shaver
connected to an electrical outlet via the special cord set.
8