Braun 5030s Mode D'emploi page 10

Trouble-Shooting
Problem
Shaver does
not charge
completely and
keeps blinking.
Charging does
not start when
connected to
power socket.
Unpleasant smell
from the shaver
head.
Battery
performance
dropped
significantly.
Shaving
performance
dropped
significantly.
Possible reason
Ambient temperature is
out of valid range.
1. Sometimes charging
could start delayed
(e.g. after long
storage).
2. Ambient temperature
is out of valid range.
3. Special cord set is not
plugged in properly.
Shaver head is cleaned
with water.
1. Foil and cutter are
worn which requires
more power for each
shave.
2. Shaver head is
regularly cleaned
with water but not
lubricated.
1. Foil and cutter are
worn.
2. Shaving system is
clogged.
Remedy
Recommended ambient temperature for
charging is 41 °F to 95 °F / 5 °C to 35 °C.
1. Wait a few minutes, if charging will
start automatically.
2. Recommended ambient temperature
for charging is 41 °F to 95 °F / 5 °C to
35 °C.
3. Special cord set needs to snap into
place.
When cleaning the shaver head with
water only use hot water and from time to
time some liquid soap (without abrasive
substances). Remove Foil & Cutter
cassette to let it dry.
1. Renew Foil & Cutter cassette.
2. If the shaver is regularly cleaned with
water, apply a drop of light machine
oil on top of the foil once a week for
lubrication.
1. Renew Foil & Cutter cassette.
2. Soak the Foil & Cutter cassette into
hot water with a drop of dish liquid.
Afterwards rinse it properly and tap
it out. Once dry apply a drop of light
machine oil on the foil.
11