Tiger JAX-S Serie Mode D'emploi page 17

„ Parts to wash when dirty
Lid
gasket
Upper
casing
Center
Heating
sensor
plate
Hook
button
Power cord and plug
Note
● Do not pull on the lid gasket.
● Always keep the inner pot and lid clean to prevent corrosion and odors.
● Do not clean the rice cooker or its parts with thinner, cleanser, bleach, disposable cloth, metal spatulas,
nylon scouring sponges or the like.
● Always clean each part separately.
● Do not immerse the steam cap, measuring cup, spatula or ladle in hot water. Doing so may cause them to
become deformed.
● Do not use a dishwasher/dryer to clean the rice cooker or its parts. Doing so may cause them to become
deformed.
● When cleaning the rice cooker with a detergent, do not use alkaline kitchen detergent.
● Always wash the steam cap after cooking with grains (amaranths, etc.). The vent on the steam cap may
clog and cause problems, like preventing the lid from opening, resulting in improperly cooked food.
32
Inside and outside the rice cooker
Wet a towel or cloth, wring out excess water, and wipe.
Center sensor
Remove burned rice and any other adhering grains of rice.
If adhering objects are hard to remove, use commercially
available sandpaper (around #320), then wet a towel or
cloth, wring out excess water, and wipe.
Around the upper casing and hook button and on the
lid gasket
Remove any adhering grains of rice, etc.
Note
● Do not allow water to get inside the rice cooker unit.
● Do not immerse the power cord in or splash it with
water. Doing so may result in short-circuiting or electric
shock.
Wipe with a dry cloth.
Removing and attaching the inner lid
Pull the inner lid towards you to remove it.
To reattach, align the inner lid gasket with the shaft on the main lid.
When attaching the inner lid, set it on the main lid by pressing the center of the inner lid without applying
excessive force.
Applying excessive force or pressing the edge of the inner lid may cause the inner lid to become deformed.
„ Attaching the inner lid gasket
If the inner lid gasket is loose, press it firmly back into place.
Inner lid gasket
Inner lid gasket
Inner lid
33