Publicité
Les langues disponibles
Les langues disponibles
8. Before connecting the radiator to the power supply, make sure the power
cord is not mechanically damaged. In case of damage, immediately contact
the seller or the manufacturer.
9. The device is made in protection class II.
10. When connecting the device permanently to the installation, observe the
following guidelines:
a. brown conductor – connection to the phase circuit (L).
b. blue wire – connection to the neutral circuit (N).
11. Make sure the radiator has been installed on the wall in accordance with the
installation instructions (included in the mounting kit).
12. Make sure that the power cord does not come into contact with the hot
parts of the radiator.
13. The power must be off during installation or removal of the device.
14. The interior of the device must not be tampered with.
15. This information material should be handed over to the end user of the
radiator.
4
OK
Publicité
