TERMA VOLTAN Manuel D'installation page 13

SMART SYSTEM
BASIC INFORMATION ABOUT THE SYSTEM
AND THE APPLICATION
Heating Zones
In the application, a newly created ʻhouse' should be divided into heating zones
(e.g. rooms) to which individual devices are assigned. It is possible to select
a schedule and view telemetry data for each zone. The list of all zones is visible
to the user in the Zones tab. The view of a single zone contains a set of actions
and information available to the user.
The temperature presented in the center of the screen of a single zone is the
current measured temperature, while the value at the bottom is the set tem-
perature that depends on the mode in which the system is currently operating:
• if the Vacation mode is active, the Vacation mode temperature is displayed
• if the Smart Location is active, the temperature for the Smart Location is
displayed
• if at least one device is in the manual mode, the temperature set for the
manual mode is displayed — the
• otherwise, the temperature for a given time interval will be displayed accor-
ding to the schedule — icon
Principles of measuring the temperature in the room (in the zone):
• If there is a temperature and humidity sensor (VTS) in a zone, its indications
are the basis for the temperature control for all devices in a given zone (re-
commended configuration);
• If there is no VTS sensor in the zone, the devices will operate based on the
average of the sensor readings of all devices in that zone (or one sensor if
one device is in the zone).
A more detailed description can be found on www.termasmart.com
EN
icon is displayed.
is displayed.
13