Ryobi RY36BI300A Mode D'emploi page 12

POWER BUTTON LED FUNCTIONS
LED indicator Status
Green The product is on.
Flashing red The product is
overloaded.
Red The product is
overheated.
Flashing yellow The battery pack
charge is low.
Flashing red (3x) The battery pack
charge is insuffi cient.
12
Original Instructions
Troubleshooting
-
1. Press the power/light button to
remove the lock state. The LED
indicator turns off .
2. Disconnect all devices. Make sure
that the battery pack is suffi ciently
charged.
3. Press the power/light button to turn
on the AC socket.
4. Reconnect all devices. If the LED
indicator fl ashes red again, the
devices exceed the capacity of the
product.
1. Disconnect all devices. Allow the
product to cool down until the LED
indicator fl ashes red.
2. Briefl y press the power/light button
to reset the product. When the LED
indicator turns green, reconnect the
devices.
Remove and charge the battery pack.
Remove and charge the battery pack.