Set-Up - Sony BRAVIA KDL-40BX450 Mode D'emploi

External Input Lock
• Entering the correct PIN code for blocked channel or external input will temporarily deactivates the "Parental
Lock" feature. To reactivate the "Parental Lock" settings, turn off and on the TV.
z • If you lost your PIN code, see page 37.

Set-up

USB Auto Start
Sleep Timer
Auto Start-up
Language
Start-up Logo
AV Set-up
HDMI Set-up
G and above To lock "General" and above programmes.
PGR and above To lock "Parental Guidance Recommended" and above
programmes.
AO and above To lock "Adults Only" and above programmes.
No block No programmes need a password to view.
Locks an external input from being watched.
To view a blocked external input, select "Unblocked".
Automatically enters the thumbnail view of the last played Photo/Music/Video
when the TV is turned on and a USB device is connected to the USB port then
turned on.
Set the time in minutes ("Off", "15", "30", "45", "60", "90", or "120") that you
would like the TV to remain on before shutting off automatically.
Starts the initial set-up procedure (page 6). This option allows you to retune the
TV after moving house, or to search for new channels that have been launched
by broadcasters.
Selects the language in which the menus are displayed.
Select "On" to display the logo when the TV is turned on. Select "Off" to disable
it.
"Video Labels"
Assigns a name to any equipment connected to the side and rear jacks. The
name will be displayed briefly on the screen when the equipment is selected.
F f
1
Press / to select the desired input source, then press
F f
2
Press / to select the desired option below, then press
Equipment labels: Uses one of the preset labels to assign a name to connected
equipment.
"Edit": Creates your own label.
"Skip": Skips an unnecessary input source.
"Video/Component Input"
Select "Auto" to have the TV detect and switch between the component video
jack or the video jack
is connected.
• You cannot use the component video jack
same time.
"Headphone/Audio Out"
Sets the sound output to headphones or external audio system connected to
the TV. Disconnect headphones from the TV when you select "Audio Out".
Allows the TV to communicate with equipment that is compatible with the
Control for HDMI function, and connected to the HDMI jacks of the TV. Note
that communication settings must also be made on the connected equipment.
"Control for HDMI"
Sets whether or not to link the operations of the TV and the connected
equipment that is compatible with Control for HDMI. When set to "On", the
following functions are available.
If the specific Sony equipment that is compatible with Control for HDMI is
connected, this setting is applied to the connected equipment automatically
when the "Control for HDMI" is set to "On" using the TV.
when component video jack
and the video jack
(Continued)
.
.
or video jack
at the
31
GB