Start-Up Guide; Checking The Accessories; 1: Attaching The Stand - Sony BRAVIA KDL-40BX450 Mode D'emploi

Start-up Guide

Checking the
accessories
Stand (1) and screws (3)
Remote RM-ED049 (1)
Size AA batteries (R6 type) (2)
x To insert batteries into the remote
4
GB
Push to
open
1: Attaching the
stand
• Refer to the supplied stand leaflet for proper
attachment for some TV models.
• For best picture quality, do not expose the
screen to direct illumination or sunlight.
1
Place the TV with its screen facing down on a
level and stable surface covered with a thick
and soft cloth.
2
Fix the TV to the stand according to the arrow
marks that guide the screw holes using
the supplied screws.
Thick and soft cloth
• Be careful not to hit the Table-Top Stand against
the edge of the surface when attaching it.
• Hold the Table-Top Stand with one hand to
avoid it dropping when attaching.
• This TV is very heavy, so two or more people
should place the TV onto thick and soft cloth.
• If using an electric screwdriver, set the
tightening torque at approximately 1.5 N·m (15
kgf·cm).
• Be sure to securely tighten the supplied screws,
otherwise the TV may fall down.
• Use an appropriate screwdriver to attach the
screws tightly without damaging the screw
head.
• Please ensure the AC power cord is away from
the stand installation location when you attach
the stand.
• Do not touch the inner side of the bottom of the
TV stand to avoid being hurt.