Viewing Pictures From The Connected Equipment - Sony BRAVIA KDL-40BX450 Mode D'emploi

Viewing pictures from the
connected equipment
Turn on the connected equipment, then press
f
to select the desired input source, then press
without any operation after pressing
under the "AV Set-up" menu (page 31), that input is greyed out in the list.
Jacks/
Input symbol on screen
A DIGITAL AUDIO OUT
(OPTICAL)
B HDMI IN 1 or 2
HDMI 1 or
HDMI 2
C
D
/Headphones
E
Video
F
/ or
Component or
Video
G PC IN
/
PC
/
. (The highlighted item is selected if 2 seconds pass
F f
/ .) When the input source is set to "Skip" in the "Video Labels"
Description
Use an optical audio cable.
Connect to the HDMI IN 1 or 2 jack if the equipment has an HDMI jack. The
digital video and audio signals are input from the equipment.
In addition, when you connect the equipment that is compatible with Control
for HDMI, communication with the connected equipment is supported. See
page 31 to set up this communication.
If the equipment has a DVI jack, connect the DVI jack to the HDMI IN 1 jack
through a DVI - HDMI adaptor interface (not supplied), and connect the
equipment's audio out jack to the PC/HDMI 1 AUDIO IN jack in the PC IN jacks
(the PC/HDMI 1 AUDIO IN jack is used as the audio in jack for both the PC IN
and HDMI IN 1 jacks).
• The HDMI jacks only support the following video inputs: 480i, 480p, 576i,
576p, 720p, 1080i, 1080p and 1080/24p.
• The HDMI jacks can support PC timing in HDMI PC mode. See page 27 for
supported PC input signal.
• Be sure to use only an authorized HDMI cable bearing the HDMI logo. We
recommend that you use a Sony HDMI cable (high speed type).
You can enjoy photo/music/video files stored in a Sony digital still camera,
camcorder or USB storage device (page 19).
Connect with an audio cable or headphones. You can listen to TV sound
through your stereo system or headphones. You can select "Variable" or
"Fixed" in the "Audio out" menu (page 25).
Connect to the video jack
equipment, connect to the L (MONO) jack
Connect to the component jacks and the audio jacks
picture quality, component connection is recommended if your DVD player
has a component video output. When using the component video jack
the video jack , select "Video" in the "Video/Component Input" menu
(page 31).
• You cannot use the component video jack
same time.
Connect to the PC IN
use a PC cable with ferrite core.
to display the connected equipment list. Press
and the audio jacks
.
and the video jack
jack and the audio jack
F
/
. If you connect mono
/ . For better
as
at the
. It is recommended to
15
GB