Husqvarna 550 XP Mark II Guide D'utilisation page 35

Approved cutting equipment - 545 Mark II and 545G Mark II
Guide bar
Length, in/cm Pitch, in
13/33 0.325
15/38
16/41
18/46
20/50
Approved cutting equipment - 550 XP Mark II and 550 XPG Mark II
Guide bar
Length, in/cm Pitch, in
13/33 0.325
15/38
16/41
18/46
20/50
13/33 0.325
15/38
16/41
18/46
20/50
13/33 0.325
15/38
16/41
18/46
20/50
Pixel
Pixel is a guide bar and saw chain combination that is
more light weight and designated to offer more energy
efficient use by cutting narrow cuts. Both guide bar and
saw chain need to be Pixel to get these benefits. Pixel
cutting equipment is marked with this symbol.
544 - 005 - 10.05.2019
Gauge, in/mm Max. nose ra-
dius
0.058/1,5 11T
12T
Gauge, in/mm Max. nose ra-
dius
0.050/1,3 11T
0.058/1,5 11T
12T
0.058/1,5 11T
12T
Saw chain
Type
Husqvarna
H25
Saw chain
Type
Husqvarna
SP33G
Husqvarna
H25
Husqvarna
H21
Filing equipment and filing angles
Use a Husqvarna file gauge to sharpen the saw chain. A
Husqvarna file gauge makes sure that you get the
correct filing angles. The part numbers are given in the
table below.
If you are not sure how to identify the type of saw chain
on your product, refer to www.husqvarna.com for more
information.
Length, drive Low kickback
links (no.)
56 Yes
64
66
72
80
Length, drive Low kickback
links (no.)
56 Yes
64
66
72
80
56 Yes
64
66
72
80
56
64
66
72
80
35