Husqvarna 550 XP Mark II Guide D'utilisation page 3

11. Fuel level window
12. Fuel tank
13. Air purge bulb
14. Starter rope handle
15. Starter housing
16. Chain oil tank
17. Muffler
18. Chain brake and front hand guard
19. Front handle
20. Switch for heated handles (545G Mark II, 550 XPG
Mark II)
21. Right hand guard
22. Clutch cover
23. Clutch drum
24. Oil pump adjustment screw
25. Chain tensioning screw
26. Chain catcher
27. Spiked bumper
28. Saw chain
29. Guide bar
30. Bar tip sprocket
31. Brake band
32. Guide bar cover
33. Operator's manual
34. Combination wrench
Symbols on the product
Be careful and use the product correctly.
This product can cause serious injury or
death to the operator or others.
Read the operator's manual carefully and
make sure that you understand the
instructions before you use this product.
Always wear approved protective helmet,
approved hearing protection and eye
protection.
Use 2 hands to operate the product.
Do not operate the product with one hand
only.
Do not let the guide bar tip touch an object.
544 - 005 - 10.05.2019
Warning! Kickback can occur when the
guide bar tip touches an object. A kickback
causes a lightning fast reverse reaction that
throws the guide bar up and in the direction
of the operator. Can cause serious injury.
Chain brake, engaged (right). Chain brake,
disengaged (left).
Choke.
Air purge.
Adjustment of the oil pump.
Fuel.
Chain oil.
If your product has this symbol it has heated
handles.
yyyywwxxxx
Husqvarna H25
Max 12T
XX
Computed kickback bar stopping angle
without actuated chainbrake, CKA wob.
XX
Computed kickback bar stopping angle with
actuated chainbrake, CKA wb.
Note: Other symbols/decals on the product refer to
certification requirements for some markets.
The rating plate shows se-
rial number. yyyy is the
production year and ww is
the production week.
Recommended cutting
equipment in this exam-
ple: Guide bar length 16
in, maximum nose radius
12 Teeth and chain type
Husqvarna H25.
3