Power Fist 8336232 Mode D'emploi page 8

V 1.5
WARNING! USE OF THIS TOOL CAN GENERATE AND DISBURSE DUST OR OTHER AIRBORNE PARTICLES,
INCLUDING WOOD DUST, CRYSTALLINE SILICA DUST AND ASBESTOS. Direct particles away from face and
body. Always operate tool in a well-ventillated area and provide for proper dust removal. Use a dust collection
system wherever possible. Exposure to the dust may cause serious and permanent respiratory or other injury,
including silicosis (a serious lung disease), cancer, and death. Avoid breathing the dust, and avoid prolonged
contact with the dust. Always use properly fitting NIOSH/OSHA approved respiratory protection appropriate for
dust exposure, and wash exposed areas with soap and water.
UNPACKING
1. Carefully remove the parts and accessories from the box.
2. Make sure that all items listed in the parts lists are included.
3. Inspect the parts carefully to make sure no breakage or damage occurred during shipping.
4. Do not discard the packaging material until you have carefully inspected and satisfactorily operated the tool.
WARNING! If any part is missing, do not operate the tool until the missing parts are replaced.
Failure to do so could result in serious personal injury.
YOUR MULTI-PURPOSE
OSCILLATING TOOL
1. ON/OFF Switch
2. Cast Aluminum Gear Head
3. Oscillating Spindle and Blade Holder
4. Flush Cutting Blade 1-3/16"
5. 3" Wood and Drywall Saw blade
6. Rigid Scraper Blade
7. Hook & Loop Sanding Pad
8. Sandpaper
CONTENTS IN PACKAGE:
Description
Oscillating Tool
1-3/16" (30mm) Flush Saw Blade
3" Wood and Drywall Saw Blade
Rigid Scraper Blade
Hook & Lop Sanding Pad
Sandpaper
Allen Wrench
Cap Screw and Washers
Operator's Manual
8
All manuals and user guides at all-guides.com
Multi-Purpose Oscillating Tool
QTY
1
1
1
1
1
3
1
1
1
For technical questions call: 1-800-665-8685
8336232