Publicité
Les langues disponibles
Les langues disponibles
CLEANING AND MAINTENANCE
Do not use abrasive cleaning agents or solvents.
1. Unplug the appliance from the mains socket.
2. Take out the food and store in a cool location.
3. Clean the appliance with a soft cloth, warm water and detergent.
4. Wipe the door seal with clear water only and then wipe dry thoroughly.
5. After cleaning, reconnect and adjust the temperature as desired.
6. Put the food back into the appliance.
The LED lights in the fridge cannot be replaced by the user. If the LED lights stop working, please contact
the local authorised service agent.
Cleaning Tips
• Remove all shelves, door shelves and drawers from the appliance. Wash them in warm soapy water
with a soft sponge. Rinse and dry thoroughly.
• Wipe the interior parts (including door switch and lamp cover) with a damp cloth soaked in a
mixture of warm water and dishwashing liquid. For stubborn stains, use baking soda.
• Wipe down the doors, including edges, with a microfiber cloth dampened with a mild dishwashing
liquid and water. Use a wet sponge and soft brush (such as toothbrush) to remove any stuck-on food.
TROUBLESHOOTING
If there is a problem with your appliance, please check the following points before contacting customer
service.
Problem
Appliance does
not operate.
Appliance is
noisy.
Appliance not
cool
SPECIFICATIONS
Electric shock protection class
Rated voltage and frequency
Rated current
Rated power input
Maximum lamp power
Refrigerant/Amount
Temperature rise time
Possible causes
No electricity at power outlet.
Cabinet not stable or level.
Temperature setting not correct.
Frequent door openings.
Large amount of food recently
added.
I
220-240V~ 50Hz
0.75A
100W
1,5W
R600a/ 29 g
37kg
Power cut safe 6,5 h
Check that the plug is correctly connected
and power switched on.
See "Installation" section.
See "Temperatures Control" section.
Minimise door openings to allow
temperatures to stabilise.
GB-24
Possible solution
Publicité
