Publicité
Les langues disponibles
Les langues disponibles
Specifications on the BOOST and DRYER modes
•
BOOST and DRYER modes have priority.
•
It is not necessary to exit from one before switching to the other.
•
When the device is in BOOST or DRYER mode, the mode can, in any case, be
changed using the remote control. In this mode, the device will exit from the previous
modes and the blower will be turned off.
•
When the blower is turned off using the ON/OFF key, BOOST and DRYER modes
EN
will also be deactivated.
Keypad lock " "
To activate or deactivate the
keypad lock, hold the DRYER
key pressed for 5 s.
While the keypad lock is active,
the device will continue to
operate exactly as immediately
before the lock was activated.
It will not be possible to regulate
the fan in any way.
The DRYER LED will blink
rapidly once a second.
Specifications on the keypad lock mode
When the keypad lock function is active, the mode set and the temperature set-point are
recorded.
If the keypad lock is active:
• If a power failure occurs, once power has been restored, the device will return to the
modes and with the set-point set before the keypad lock function was activated.
• The programming and temperature set-point selectors and the BOOST or DRYER keys
will have no effect.
• The BOOST and DRYER modes will continue to operate normally.
• The OFF mode retains priority so if the selector is positioned to OFF, the device will
remain off.
• If the device returns to ON mode, with the keypad lock active, the device will return to
the mode set prior to the keypad lock.
Keypad lock indication:
The DRYER LED blinks once briefly to indicate that the keypad lock has been activated.
• DRYER not active => OFF LED, off blinking once a second.
• DRYER active => ON LED, on turning off once a second.
5 sec
5 s
34
Publicité
