The DRYER and 15 min LEDs
will start to blink.
Within 5 s you will be able to
change the duration by pressing
the DRYER key.
The duration set is indicated by
a LED blinking green.
You can set 15 min, 30 min or
60 min.
5 s after pressing the key, the
DRYER program is validated.
The duration LEDs start a
countdown to indicate the time
remaining.
The DRYER LED is steady red
while the device is heating.
The ON/OFF LED is violet if the
heating element is not active,
red if it is active.
To exit from the DRYER program before the time indicated, press the DRYER key. If an
unexpected power failure of less than 5 s occurs, the DRYER program will be reactivated
automatically. If the power failure lasts for more than 5s, the DRYER program will be
terminated.
2h 60
30
15
2h 60
30
15
2h 60
30
15
2h 60
2h 60
30
min
30
30
15
15
33
5 sec
2h 60
15
min
30
15
EN