THERMOSTAT ICONS AND MODES
Pilot wire
Comfort
Night
Anti-freeze
Automatic
ON/STAND-BY
Press the
key to turn the device on or set it
in "Stand-by" mode.
When the thermostat is on, the top part of
the display shows the mode set and the
temperature. In "Stand-by" mode, the display
shows the current time and day of the week.
NOTE - The towel warmer is controlled remotely
using the infrared remote control provided. To
confirm the signal received, the towel warmer
emits a short beep and the "power" LED
blinks white. If this is not the case, repeat the
operation because it means that the signal has
not been received by the towel warmer.
Keypad lock
Boost
Eco
Adaptive start control
Open window detection
23
EN