Publicité
Les langues disponibles
Les langues disponibles
PILOT WIRE MODE
In this mode, the radiator is controlled by a remote control unit.
1.
Press the
2.
Select the desired temperature using the
EN
The operating mode will be selected by the pilot wire control unit.
The device also supports the more advanced, six-order "Pilot Wire" system, which
provides the functions described here below:
Stand-by: turns off the heating element but the thermostat remains on.
1.
2.
Comfort: maintains the "Comfort" temperature set by the user.
Night: maintains the "Night" temperature set by the user.
3.
4.
Anti-freeze protection: maintains the ambient temperature at 7°C.
Eco: maintains the ambient temperature 3.5°C below the "Comfort"
5.
temperature.
Eco 1: maintains the ambient temperature 1°C below the "Comfort"
6.
temperature.
7.
Eco 2: maintains the ambient temperature 2°C below the "Comfort"
temperature.
COMFORT and NIGHT MODES
Two temperature levels can be set:
•
"Comfort" temperature: this temperature is used in the "Programming", "Pilot
wire" and "Comfort" functions.
•
"Night" temperature: this temperature is used in the "Night" and "Programming"
modes.
IMPORTANT
1.
The "Night" temperature cannot be higher than the "Comfort" temperature, so the
"Night" temperature can be set between 10°C and the "Comfort" temperature.
The "Comfort" temperature can be set to any value between 7°C and 30°C.
If the "Comfort" temperature is set below the "Night" temperature, the latter is
automatically set to the same temperature as the former.
key until the display shows the corresponding icon.
24
and
keys.
Publicité
