DELTACALOR DIGITAL BLOWER Manuel D'instructions page 32

5 s after pressing the key, the
BOOST program is validated.
The BOOST LED stops blinking.
EN
The duration LEDs start a
countdown to indicate the time
remaining.
The BOOST LED is steady red
while the device is heating.
The ON/OFF LED is steady red
while the heating element of the
towel warmer is active.
To exit from the BOOST program before the time indicated, press the BOOST key.
DRYER mode
In DRYER mode, the fan operates at maximum speed.
The heating element of the device is active.
The maximum temperature of the room is restricted to 39°C.
DRYER mode has priority and can be activated from any operating mode (except with the
device turned off).
IMPOSTAZIONE
SETTING
Programming DRYER mode:
Press the DRYER key.
2h 60
39°C
SCALDASALVIETTE
TOWEL WARMER
2h 60
30
5 sec
15
2h 60
30
min min
30 30
15 15
Aumento della temperatura utilizzando il
dispositivo a velocità del ventilatore massima no alla
Increase of the temperature using the device at the
massima temperatura di 39°C e lo scaldasalviette no
maximum fan speed until the temperature of 39°
al raggiungimento della temperatura set-point.
is reached and the towel warmer until the set-point
temperature is reached
DRYER
DRYER
32
2h 60
15
30
15