USING YOUR REFRIGERATOR
USING YOUR REFRIGERATOR
USING YOUR REFRIGERATOR
PULLOUT DRAWERS
PULLOUT DRAWER
Top Drawer
PULLOUT DRAWER
Top Drawer
1. To remove, pull the drawer out to full extension. On
Top Drawer
the left rail, use a flat blade screwdriver to push in on
1.
To remove, pull the drawer out to full extension. In
the tab to release the drawer from the rail, as shown
1.
To remove, pull the drawer out to full extension. In
case of left side, push hook aside as you see below
below. Once the left side is loose, push the tab on the
case of left side, push hook aside as you see below
using the tool such as flat screwdriver. In case of right
right side with your finger to release the drawer. Lift
using the tool such as flat screwdriver. In case of right
side, push hook aside using your finger.
the front of the drawer up, then pull it straight out.
side, push hook aside using your finger.
And then lift the front of the drawer up. pull it straight
And then lift the front of the drawer up. pull it straight
out.
out.
2. To replace, slightly tilt up the front of the drawer, insert
2. To replace, insert drawer into frame as you see. And
2. To replace, insert drawer into frame as you see. And
the drawer into the frame, and push the drawer back
push drawer below until to hear some sound like cllick.
push drawer below until to hear some sound like cllick.
into place until you hear a click.
Middle Drawer
1. To remove, pull the drawer out to full extension. Lift the
Middle Drawer
front of the drawer up, then pull it straight out.
Middle Drawer
1. To remove the middle drawer.
1. To remove the middle drawer.
Pull the drawer out to full extension. Lift the front of
Pull the drawer out to full extension. Lift the front of
the drawer up, then pull it straight out.
the drawer up, then pull it straight out.
2. To replace, slightly tilt up the front of the drawer,
insert the drawer into the frame, and push it back into
2. To Install, slightly tilt up the front and insert the drawer
place.
2. To Install, slightly tilt up the front and insert the drawer
into the frame and push it back into push it back
into the frame and push it back into push it back
place.
place.
DURABASE
1. To remove the Durabase, push it to the back as much
DURABASE
DURABASE
as possible. Tilt up the front of the Durabase and pull
1. Remove all pullout drawer.
straight out.
1. Remove all pullout drawer.
2. To remove the Durabase, push it to the back as much
2. To replace, insert the Durabase in the rail assembly.
2. To remove the Durabase, push it to the back as much
as possible. Tilt up the front of the Durabase and pull
as possible. Tilt up the front of the Durabase and pull
straight out.
straight out.
3. To replace, insert the Durabase in rail assembly.
3. To replace, insert the Durabase in rail assembly.
1
1
2
1
DURABASE DIVIDER
The Durabase divider allows you to organize the
DURABASE DIVIDER
DURABASE DIVIDER
Durabase area into sections. It can be adjusted from side
The Durabase divider allows you to organize the
to side to accommodate items of different sizes.
The Durabase divider allows you to organize the
Durabase area into sections. It can be adjusted from side
Durabase area into sections. It can be adjusted from side
to side to accommodate items of different sizes.
to side to accommodate items of different sizes.
WARNING: If the Durabase divider is removed, there is
enough open space for children or pets to crawl inside.
WARNING: If the Durabase divider is removed, there is
To prevent accidental child and pet entrapment or
WARNING: If the Durabase divider is removed, there is
enough open space for children or pets to crawl inside.
suffocation risk, DO NOT allow children or pets to
enough open space for children or pets to crawl inside.
To prevent accidental child and pet entrapment or
touch or go near the drawer.
To prevent accidental child and pet entrapment or
suffocation risk, DO NOT allow children or pets to
suffocation risk, DO NOT allow children or pets to
touch or go near the drawer.
touch or go near the drawer.
30
28
28
2
2