Available Operations During Call; Useful Functions; Songpal With Iphone/Android Phone - Sony MEX-N5100BT Mode D'emploi

By voice tags
You can make a call by saying the voice tag stored
in a connected cellular phone that has a voice
dialing function.
1
Press CALL, rotate the control dial to
select [VOICE DIAL], then press it.
Alternatively, press VOICE while the "SongPal"
function is off.
2
Say the voice tag stored on the cellular
phone.
Your voice is recognized, and the call is made.
To cancel voice dialing
Press VOICE.
Available Operations during
Call
To adjust the ringtone volume
Rotate the control dial while receiving a call.
To adjust the talker's voice volume
Rotate the control dial during a call.
To adjust the volume for the other party (Mic
gain adjustment)
Press MIC.
Adjustable volume levels: [MIC-LOW], [MIC-MID],
[MIC-HI].
To reduce echo and noise (Echo Canceler/
Noise Canceler Mode)
Press and hold MIC.
Settable mode: [EC/NC-1], [EC/NC-2].
To switch between handsfree mode and
handheld mode
During a call, press MODE to switch the phone call
audio between the unit and cellular phone.
Note
Depending on the cellular phone, this operation may
not be available.
To check the status of SMS*
flashes when a new SMS is received, and stays
lit when there are unread messages.
* Available only for a cellular phone supporting
MAP (Message Access Profile).
16
GB

Useful Functions

SongPal with iPhone/Android
Phone
Downloading the "SongPal"
application (version 2.1 or later)
is required from the App Store
for iPhone or from Google Play
for Android phone.
Notes
 For your safety, follow your local
traffic laws and regulations, and
do not operate the application
while driving.
 "SongPal" is an app for
controlling Sony audio devices
which are compatible with "SongPal", by your iPhone/
Android phone.
 What you can control with "SongPal" varies
depending on the connected device.
 To make use of "SongPal" features, see the details on
your iPhone/Android phone.
 For further details on "SongPal," visit the following
URL: http://rd1.sony.net/help/speaker/songpal/
Establishing the SongPal connection
1
Make the BLUETOOTH connection with
iPhone/Android phone (page 8).
2
Launch the "SongPal" application.
3
Press and hold ENTER on the unit for
more than 2 seconds.
Connection to iPhone/Android phone starts.
For details on the operations on iPhone/
Android phone, see the help of the application.
If the device number appears
Make sure that the number is displayed (e.g.,
123456), then select [Yes] on the iPhone/Android
phone.
To terminate connection
Press and hold ENTER.