Assembly Instructions; Names Of Components - Maruyama MS038 Manuel De L'utilisateur

SAFETY PRECAUTIONS FOR APPLYING
CHEMICALS
Wear appropriate protection when spraying chemicals to eliminate hazard caused by contact
with skin or inhalation of chemicals (herbicides, pesticides, ect.). Always wash clothing
thoroughly after applying chemicals. Shower with soap and water after applying any chemicals.
HAT
GOGGLES
RESPIRATOR
CHEMICAL
RESISTANT
GLOVES
RUBBER
BOOTS
Always read and follow all chemical cautions or handling and usage instructions supplied by the
chemical manufacturer. Remember, many chemicals are considered hazardous.
Dispose of chemical containers as instructed on chemical label.
Inspect equipment for loose screws, and damage to parts before starting operation.
Check connections of spray hose, nozzle, ect., for leakage.
Insure proper ventilation when you operate the equipment in a greenhouse or other enclosed
area.
Dilute and prepare chemicals in accordance with chemical manufactures instruction.
Make sure the covers of chemical tank and fuel tank are secured.
The MARUYAMA BACK PACK POWER SPRAYER comes with an Owner's / Operator's Manual
and a Warranty Registration Card.
English
HEARING
PROTECTION
LONG
SLEEVES
7

ASSEMBLY INSTRUCTIONS

Locate and identify all the components (see sketch)
Wide nozzle
Levercock
Nozzle pipe
Spray hose assy
Box spanner
Hexagonal
bar spanners

NAMES OF COMPONENTS

Nozzle
Spark plug
Recoil starter
Throttle lever
8
Operator's manual
Warranty Registration Card
Chemical tank
Spray hose
English