Publicité
Les langues disponibles
Les langues disponibles
4.3 ATTACH THE EXHAUST HOSE
The air conditioner needs to be ventilated to the outside so that the
air containing waste heat and moisture discharged from the
appliance can be discharged from the room.
Do not replace or extend exhaust hose which will result in
decreased efficiency, or even worse shut down the unit due to low
backpressure.
Step 1:
Connect the hose connector to one
end of the exhaust hose.
Step 2:
Connect the windows kit
adapter to the other end of
the exhaust hose.
Step 3:
Extend the adjustable window kit
to the length of your window.
Connect the exhaust hose to the
window kit.
14
Step 4:
Close your window to secure the kit
in place. It needs to hold the
windows kit firmly in place, secure
the window kit with duct tape if
required. It is recommended that the
gap between the adapter and the
sides of the window should be
sealed off for maximum efficiency.
Step 5:
Attach the hose connector to the exhaust air
outlet of unit.
Step 6:
Adjust the length of the flexible exhaust
hose, to make sure that the distance
between the unit and the window will be
more than 70cm(27.5inches), height from
exhaust hose to the floor will be more
than 90cm(35.4inches), and avoid bends
in the hose. Then place AC near an
electrical outlet.
15
Publicité
