Publicité
Les langues disponibles
Les langues disponibles
1. Make sure the control knob is in the"OFF" position. Unscrew the
push button cap on the ignition module located on the control panel
to access the Battery(R) compartment. The ignition module requires
one AAA size Battery(M)
H
I
2. Attach right front leg(G), right back leg(H) and 2pcs left legs(F) to
the metal stand(l) using 4pcs M6x15 screws.
E
D
3. Attach 2pcs side panels(E) and front panel(D)to the legs using
12pcsM6x15 screws .
16
N
F
Aa x4 M6x15
Bb x4 M6
G
Aa x12 M6x15
Bb x12 M6
E
B
4. Attach steel base to the bottom part of the table top(B) using
8pcsM6x15 screws.
CYLJINDER VALVE
BLACK COUPLING NUT
turn clockwise to cornect
REGUL ATOR
5. Turn the cylinder valve on the tank clockwise to close the propane
tank. Attach the pre-assembled regulator from the table top(B) to
the cylinder valve by turning the regulator coupling nut clockwise.
Make sure it is fastened securely and tighten connections by hand
only.
6. Attach hose of regulator tightly to the bracket.
Aa x8 M6x15
Bb x8 M6
PRESSURE
RELIEF VALVE
BLEED-OFF
VALVE
turn clockwise
to reaeal
17
Publicité
