Publicité
Les langues disponibles
Les langues disponibles
LP (Liquid Propane) gas supply connection
Always confirm that the burner control knob is in the off position
before connecting the gas sup.
Do not obstruct the flow of combustion air and ventilation air to the
appliance.
To Connect:
1. Ensure that there is no debris caught in the head of the gas
cylinder, head of there regulator valve.
2. Insert the nipple of the valve coupling into the cylinder valve and
tighten the black coupling nut by turning it clockwise with one hand
while holding the regulator with the other hand. (See diagram.) Hand
tightens only.
To Disconnect:
1. Always confirm that the cylinder valve is in the OFF position
before disconnecting the gas supply.
2. Hold the regulator with the one hand and loosen the black
coupling nut by turning it counter-clockwise with the other hand.(See
diagram.)
IMPORTANT
Disconnect the propane cylinder from the regulator valve when the
appliance is not in use.
22
PRESSURE
RELIEF VALVE
CYLJINDER VALVE
BLACK COUPLING NUT
BLEED-OFF
turn clockwise to cornect
VALVE
turn clockwise
REGUL ATOR
to reaeal
SELECTING A LOCATION
Always place this outdoor appliance on a hard, level
non-combustible surface such as concrete, rock, or stone.
Minimum Clearance from Unit to Combustible Materials
48"(121.9cm) from
the top; 72" (182.9cm) from all sides and back. Do not locate this
appliance under any overhead enclosure.
Position the appliance so that you have easy access to the control
knob.
MIN.CLEARANCE
72in (182.9cm)
MIN.CLEARANCE
72in (182.9cm)
VISUAL CHECK
Prior to each use, check the hose and valve for excessive wear or
abrasions.
Dumer
tube
Metal flex
tube
Peguletor
hase
Qnincgi
23
Publicité
