Publicité
Les langues disponibles
Les langues disponibles
ASSEMBLY INSTRUCTIONS
*Please keep this owner's manual for future reference.
*If you have opened the carton and removed all packages, please
disregard the STEP 1.See the STEP 2 directly.
STEP 1
Unpack and identify all parts using the parts list provided.
STEP 2
1) Check each part before using the product. Make sure the gas
supply system is turned "OFF" before assembling. See Figure 1
2) Locate the battery, remove the plastic cover first. Unscrew the
rubber cap of Electric Ignitor, place a AAA battery into the battery
case. Make sure the posit pole ("+") is towards the cap. Screw the
cap back to the battery case tightly. Se Figure 2
3) Place the lava rocks evenly in the fire bowl on the top of the
firebowl. See Figure 3
4) Open the storing door on the firebowl for the gas tank.
5) Put the gas tank in the metal stand. Make sure the gas tank sits
on the metal stand completely. Turn the wing screw on the outer part
of metal stand clockwise to secure the gas tank tightly.
See Figure 4.5
6) use the connector to assemble the glass cover, pay attention to
the crew to protect, not loose phenomenon.
See "LP (Liquid Propane) gas supply connection" for tank
connection
20
STEP 3
1
2
4
5
WARNING
** DO NOT COVER THE IGNITION SCREEN
When placing the lava rocks into the fire bowl. Always keep ignition
screen-visible.
This screen must be clear and free of obstructions at all times to
insure proper operation.
Do not place lava rocks on
screen. Keep screen clear
CORRECT
The burner of the fire bowl must be covered by lava rocks completely.
Otherwise, the flame may be extinguished occasionally.
See the figure CORRECT and INCORRECT for reference.
3
6
Screen
INCORRECT
21
Publicité
