Télécharger Imprimer la page

Kärcher K 5 Basic Mode D'emploi page 19

Publicité

Les langues disponibles

Les langues disponibles

Description of the Appliance
The scope of delivery of your appliance is il-
lustrated on the packaging. Check the con-
tents of the appliance for completeness
when unpacking.
Illustrations on Page 2
1 Garden hose connector (female)
2 Coupling element for water connection
3 Water connection with integrated sieve
4 Quick coupling for high pressure hose
5 Appliance switch „0/OFF" / „I/ON"
6 Transport handle, detachable
7 Accessory net
8 Mains cable with mains plug
9 Detergent suction hose with filter
10 Transport wheel with wheel cap
11 Trigger gun
12 Lock trigger gun
13 Key to detach the high pressure hose
from the trigger gun
14 High pressure hose
15 Spray lance with Dirtblaster
For strong contaminations.
16 Spray lance with pressure regulation
(Vario Power)
Carrying out the most common cleaning
tasks.
The working pressure can be continu-
ously increased from "SOFT" to
"HARD". To adjust the working pres-
sure, release the trigger gun lever and
turn the spray lance to the desired posi-
tion.
Suitable for use with detergents.
** Additionally required
17 Use a fabric reinforced water hose.
– Minimum diameter, 1/2 inches (13 mm).
– Minimum length 7.5 m.
Assembly
Illustrations on Page 3
Mount loose parts delivered with appliance
prior to start-up.
Install the transport handle
Illustration
 Place the transport handle into the in-
take until you feel resistance. Use the
heel of your hand or a soft rubber mallet
to position it.
Attach the accessories net
Illustration
 Hook the accessories net into the hooks
shown in the illustration.
English 19

Publicité

loading