LaserLiner DampMaster Data Plus Mode D'emploi page 20

16
Temperature units of measure setting
The unit of measure for material compensation can be set to either °C or °F. The current ambient
temperature is shown at the bottom of the display. This setting is permanently stored.
2 sec
1.
17
Auto-Hold function
With the Auto-Hold function you can hold the measured value (as soon as it is stable) for several seconds
in the display while taking a measurement. This is signalled by the measured value display and LED
indicator flashing as well as a short beep. This setting is permanently stored.
2 sec
1.
18
To record measured data/basic setting
With the moisture meter you can record measured data for subsequent documentation and evaluation
purposes. The data are read out and evaluated with the aid of the supplied software. This basic setting in
the moisture meter defines whether and in which form the measured data are to be logged.
Off: No data recording
AUTO: Record data at a selectable location marker with automatic confirmation
Location: Record data at a selectable location marker with manual confirmation
2 sec
1.
!
For further information on how to use the software, refer to the Help function that contains a
detailed description of the functions.
20
GB
All manuals and user guides at all-guides.com
2.
2.
3.
2.
3.
3.
3.
3.
3.
3.