LaserLiner DampMaster Data Plus Mode D'emploi page 14

!
Read the operating instructions and the enclosed brochure „Guarantee and additional notices" completely.
Follow the instructions they contain. Safely keep these documents for future reference.
Function/Application
This material moisture meter operates on the resistance measuring principle. The resistance measuring
principle determines the moisture-dependent conductivity of the material when the test prods make contact
with the material, compares the result against the stored material-dependent characteristics and calculates
the relative material moisture as a percentage. The moisture meter is used to determine the moisture content
in wood and building materials. The measuring instrument also features a material-independent index mode
and assessment of material moisture in %cm. The storage of measured data enables separate documentation
and evaluation via the integrated USB interface and supplied PC software.
The integrated building materials characteristics correspond to the stated construction materials without
admixtures. Construction materials will vary from manufacturer to manufacturer, due to the way in which
!
they are produced. This is why, in the event of different product compositions or unfamiliar construction
materials, a one-off comparative moisture measurement should be taken using methods that can be
calibrated (e.g. kiln-drying method). If different measured values occur, they should either be viewed
relatively or the index mode for moisture/drying behaviour should be used.
1
1.
3.
6LR61 9V
1
8
7
6
14
GB
All manuals and user guides at all-guides.com
2
ON
2 sec
2.
2
5 + 6
3
4
5
1
Test prods, resistance measurement
2 USB interface
3 Wet/dry LED indicator
4 ON/OFF
Navigation buttons/menu
7 Material selection mode/confirm entry
8 LC display
3
OFF
2 sec