Teuco Hydrosilence Manuel De L'utilisateur page 14

EN
DISPLAY SETTINGS - INFO
Whenever a function is activated, or the system is
ready (Display showing READY) the user can:
- Set the CLOCK
- Change the Language of the display
Press the "INF O" button the display will show the
Info menu. Select the setting to be changed using
the "▲" and "▼" buttons.
AUTOCONFIRM: If no button is pressed for 5 seconds while the Info menu remains active, the display
reverts to the previous item.
CLOCK
Select TIME from the Info menu.
Press "ENTER"
the display will show SET HOURS.
Use the "▲" and "▼" buttons to change the Hours
displayed.
Confirm the selection by pressing "ENTER" the
display shows SET MINUTES.
Use the "▲" and "▼" buttons to change the Minutes
displayed.
Confirm the selection by pressing "ENTER" the
display shows SELECT Clock MODE.
Use the "▲" and "▼" buttons to change the Clock
display MODE.
Confirm the selection by pressing "ENTER" the
display will revert to the Info menu.
AUTOCONFIRM: If no button is pressed for 5 seconds while the Clock menu remains active, the
current setting AUTOCONFIRMS and the display reverts to the Info menu.
14
INFo 20:30
CLoCK
INFo 20:30
LANGUAGE EN
INFo 20:30
Info menu
INFo 20:30
CLoCK
Info menu
INFo 20:30
CHANGE HoUR
Display CLOCK
INFo 20:30
CHANGE MINUTES
Display CLOCK
INFo 20:30P
CHANGE MoDE
Display CLOCK
INFo 20:30
CLoCK
Info menu
HYDROTOP - Hydrosilence