Guide To Parts And Controls; Main Unit; Display Window - Sony MEX-N5300BT Mode D'emploi

Guide to Parts and Controls

Main unit

 PTY (program type)
Select PTY in RDS.
(browse) (page 13, 15, 16, 17)
Enter the browse mode during playback.
(Not available when a USB device in
Android mode or iPod is connected.)
 Front panel release button
 SRC (source)
Turn on the power.
Change the source.
OFF
Press and hold for 1 second to turn the
source off and display the clock.
Press and hold for more than 2 seconds
to turn off the power and the display.
If the unit is turned off and the display
disappears, operation by the remote
commander is not available.
 Control dial
Rotate to adjust the volume.
PUSH ENTER
Enter the selected item.
Press SRC, rotate then press to change
the source (timeout in 2 seconds).
MENU
Open the setup menu.
6
GB
VOICE (page 18, 20, 21)
Press and hold for more than 2 seconds
to activate voice dial, voice recognition
(Android smartphone only), or the Siri
function (iPhone only).
N-Mark (MEX-N5300BT only)
Touch the control dial with Android
smartphone to make BLUETOOTH
connection.
 Disc slot

 Display window

 USB port
  (disc eject)

/ (SEEK –/+)
Tune in radio stations automatically.
Press and hold to tune manually.
/ (prev/next)
/ (fast-reverse/fast-forward)

(back)
Return to the previous display.
MODE (page 12)

CALL
Enter the call menu. Receive/end a call.
Press and hold for more than 2 seconds
to switch the BLUETOOTH signal.
 Receptor for the remote commander