Publicité
Les langues disponibles
Les langues disponibles
Introduction
Static electricity can cause damage to printed circuit boards (PCBs). Use correct
precautions when you touch PCBs.
Keep PCBs in antistatic containers.
Put on a grounded wrist strap when you touch PCBs.
Purpose
This Field Service Bulletin gives the replacement procedures for the 3-phase power cord and the
strain relief on the Powermax65/85 and the Powermax65/85 SYNC.
Tools and materials needed
Assorted Phillips
Assorted Phillips offset screwdrivers
Large adjustable wrench
Powermax65/85, Powermax65/85 SYNC
WARNING
ELECTRIC SHOCK CAN KILL
Disconnect electric power before doing installation or maintenance. You can
get a serious electric shock if electric power is not disconnected. Electric
shock can seriously injure or kill you.
All work that requires removal of the plasma power supply outer cover or
panels must be done by a qualified technician.
Refer to the Safety and Compliance Manual (80669C) for more safety
information.
NOTICE
, TORX
, and blade screwdrivers
®
®
Field Service Bulletin
Power Cord and Strain Relief Replacement
807020
3
Publicité
