Hypertherm Powermax65/85 Mode D'emploi page 16

Power Cord and Strain Relief Replacement
Install the plasma power supply component barrier and cover
1. Push in the sides
component barrier so that the
component barrier bends out
slightly down the center.
2. Put the sides of the component
barrier inside the plasma power
supply frame
16
WARNING
SHOCK HAZARD
You can get a serious electric shock if you touch exposed plasma power
supply components. Electric shock can seriously injure or kill you.
You must install the component barrier and the plasma power supply cover.
Never operate the plasma power supply unless the component barrier and the
plasma power supply cover are in position.
of the
1
.
2
807020
1
Field Service Bulletin Powermax65/85, Powermax65/85 SYNC
2