Publicité
Sommaire
Sécurité
Axe arrière avec UDH
Acheminement SLR
avec changement de
vitesse AXS
IsoStrut
dérailleur à transmis-
Acheminement SLR
Acheminement SL avec
avec changement de
changement de vitesse
vitesse mécanique
Maintenance de
Bagues, joints racleurs
l'IsoStrut
du chariot et cales en
Copyright 2023 Trek Bicycle Corporation Tous droits réservés.
Axe arrière avec
Pivot principal
sion SRAM
Acheminement SL
avec changement de
AXS
vitesse mécanique
Remplacer les bagues
et les racleurs et du
mousse
Supercaliber 2024
Bras oscillant
Protections du cadre
Specifications
Chainline (1x only)
55mm
Chainring (1x only)
Minimum
Maximum
30T Round
38T Round
Rear brake mount
160mm Direct Post Mount
OLD
Rear Hub: 148mm
Maximum tire size
29" x 2.4"
Notice: Measurements of actual tires may vary. Always
verify there is sufficient clearance between the tire and
the frame. Improper tire size could damage the bicycle
frame. Trek recommends 6mm clearance above and on
the sides of the tire.
Bottom bracket
Press fit BB92
Spécifications
chariot
2024 Supercaliber
Seat post
WARNING
Always follow the seatpost manufacturer's minimum
insertion recommendation. Failure to follow the recom-
mendation could cause damage to the seatpost and
result in injury to the rider.
Minimum insertion: Refer to seatpost manufacturer
Maximum insertion:
S: 215
M: 225
ML: 250
L: 270
XL: 330
Seat tube inside diameter: 31.6mm
Seat tube post clamp outer diameter: 36.2mm
Fork
WARNING
Exceeding the recommended maximum fork length could
damage the bicycle and result in injury to the rider.
Travel
Sag
Axle to Crown
Frame/Size
Axle to Crown (mm)
Travel (mm)
S, M, ML, L, XL Recommended
515
110
Maximum
533
120
Recommended sag: Refer to the suspension setup card
included with your bike or the suspension calculator at
Trekbikes.com/suspension-calculator.
19
1
Publicité
