Problem
The suction power
is weak.
The device
emits dust when
vacuuming.
The power cord
cannot be wound
up completely.
An unpleasant
odour develops
when vacuuming.
Technical data
Model number:
Product number:
Voltage supply:
Output:
Safety class:
Disposal
The packaging material can be recycled. Dispose of the packaging in an
environmentally-friendly manner and make it available to the collection service
for recyclable materials.
Dispose of the device in an environmental-friendly manner. The device does
not belong in the household waste. Dispose of it at a recycling centre for old
electrical and electronic devices.
For more information, please contact the administration in your community.
Customer service/importer:
DS Produkte GmbH, Am Heisterbusch 1, 19258 Gallin, Germany
Tel.: +49 38851 314650 *)
*) Calls subject to a charge.
All rights reserved.
Potential cause/solution/tips
•
Is the auxiliary air valve on the handle open? Close it.
•
Is the dust bin too full? Empty the bin.
•
Are the fi lters very dirty? Clean them.
•
Is the nozzle, telescoping tube or suction hose plugged?
Turn the device off, pull the mains plug out of the socket and
remove the obstruction (also see chapter "Assembly").
•
Has the dust bin not been closed properly and/or is it not
(properly) inserted in the device? Correct this.
•
The cord has not been properly wound up in the device. Pull
it out somewhat and then push the button
the cord winder again.
•
Are
you
using
An odour often develops when using new devices for the
fi rst time. The odour should disappear once you have used
the device a few times.
VC-TC 3503-1
Z 8919
220 – 240 V~, 50 Hz
700 W
II
the
device
31
for engaging
for
the
fi rst
time?