Problem
The suction power
is weak.
The device
emits dust when
vacuuming.
The power cord
cannot be wound
up completely.
An unpleasant
odour develops
when vacuuming.
Technical Data
Model number:
KPA10-1
Product number: Z 09271
Voltage supply:
220 – 240 V~, 50 Hz
Output:
1000 W
Safety class:
II
Disposal
The packaging material is recyclable. Please dispose of it in an environmentally
friendly manner and take it to a recycling centre.
Dispose of the article in an environmentally friendly manner. It should not be
disposed of in the normal household waste. Please dispose of it at a recycling
centre for used electrical and electronic devices. You can obtain more informa-
tion from your local authorities.
27
Potential cause/solution/tips
•
Is the auxiliary air valve on the handle open? Close it.
•
Is the dust bin too full? Empty the bin.
•
Are the fi lters very dirty? Clean them.
•
Is the nozzle, telescoping tube or suction hose plugged?
Turn the device off, pull the mains plug out of the socket and
remove the obstruction (also see chapter "Assembly").
•
Has the dust bin not been closed properly and/or is it not
(properly) inserted in the device? Correct this.
•
The cord has not been properly wound up in the device. Pull
it out somewhat and then push the button
the cord winder again.
•
Are
you
using
An odour often develops when using new devices for the
fi rst time. The odour should disappear once you have used
the device a few times.
the
device
for
Customer Service / Importer:
DS Produkte GmbH
Am Heisterbusch 1
19258 Gallin
Germany
Tel.: +49 38851 314650
(Calls to German landlines are
subject to charges. The cost varies
depending on the service provider.)
EN
for engaging
the
fi rst
time?
All rights reserved.