IKEA FORNEBY Serie Mode D'emploi page 29

ENGLISH
Step 1 Turn off the oven and wait un‐
til it is cold.
Step 2 Pull the front of the shelf sup‐
port away from the side wall.
Step 3 Pull the rear end of the shelf
support away from the side
wall and remove it.
Step 4 Install the shelf supports in the
opposite sequence.
The retaining pins on the tele‐
scopic runners must point to
the front.
How to use: Pyrolytic Cleaning
Clean the oven with Pyrolytic Cleaning.
Warning! There is a risk of burns.
Caution! If there are other
appliances installed in the same
cabinet, do not use them at the
same time as this function. It can
cause damage to the oven.
Warning! Ensure that any pets
(especially birds) are taken as far
as possible from the vicinity of the
appliance location during and
after the Pyrolytic cleaning and
first use maximum temperature
operation. Keeping them in a
different room would be the
preferred option during the
pyrolytic cycle and until appliance
has cooled down again to room
temperature. Good ventilation
has to be provided during and
after (till appliance cool down)
operations of the pyrolytic cycle
and first maximum temperature
use cycle.
1
Warning! Before carrying out a
Pyrolytic self-cleaning function or
the First Use, please remove from
the oven cavity:
• Any excess food residues, oil
or grease spills / deposits.
• Any removable objects
(including shelves, side rails /
telescopic runners, etc.
provided with the product)
particularly any non-stick pots,
pans, trays, utensils etc.
Before you turn on the Pyrolysis:
• remove all the accessories and removable
shelf supports.
• clean the oven floor with warm water and
mild detergent.
• clean the inner door glass with warm
water and soft cloth.
• close the oven door.
2
29