Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION AND OPERATING CONDITIONS OF THE
Connect to the power supply
•
This appliance should be connected to AC 120V/60Hz supply socket. The socket must be fitted properly,
and must be supplied with an earthing conduit and a 15A fuse.
•
It is a legal requirement that the appliance is properly grounded. The manufacturer will not be held
liable for any damage or injury which may result from the failure to fulfil this requirement.
•
Do not use adapters, multiple sockets and two-wire extension cords. If it is necessary to use the
extension cord, it must have an appropriate wire gauge and safety certification for the load requiremtn
of this appliance.
•
If an extension cord is used, its socket must be located at a safe distance, away from sinks, and must not
be in a place where it could be flooded by water or waste water.
•
See the serial plate at the lower part of the internal wall of the appliance for detailed specifications**.
Disconnecting the power supply
•
Make sure the appliance can be easily disconnected from the mains, either by pulling the plug out of
the mains socket, or by switching off the breaker.
APPLIANCE
5
Publicité
