Publicité
Les langues disponibles
Les langues disponibles
BEFORE FIRST USE
You must allow the fridge to settle for at least twenty four hours after transport prior to switching the power on. It
is recommended that you clean the interior of the appliance prior to first use, using a solution of baking
soda(sodium bicarbonate) and warm water and then thoroughly drying the interior. The fridge may have an odour
to it at first use. This will disappear as the appliance cools.
Please note:
The appliance will start with a default set temperature of 5 (41 ) for fridge, 2
(35.6 ) for special fridge
compartment and -18
(-0.4 ) for freezer and work continuously until it achieves the correct temperatures. If the
appliance is switched off, you should allow five minutes before switching it on again to prevent unnecessary strain
to the compressor. Never store inflammable or explosive items and strong corrosive acids or alkalis in the appliance.
This fridge cools your food by making the inside back of the cavity cold. It is normal for frost to build up on this
surface; it then turns into liquid during compressor off cycles and drains through a small drain at the bottom, where
it evaporates harmlessly. The presence of frosting or moisture at the back is normal.
12
Publicité
