Napoleon GL22N Instructions D'installation Et D'utilisation page 8

8
4.0 FINISHING
4.1 SAND OR GLASS MEDIA PLACEMENT
A. Using sand for natural gas models (GL22N, GL28N, GL32N) or glass for propane models (GL22P,
GL28P, GL32P), spread the media evenly over the burner pan with a gradual downward slope toward
the front of the burner pan.
B. Spread the glowing embers evenly on top of the media.
NOTE: DO NOT COVER THE PILOT WITH MEDIA OR EMBERS. DO NOT OVERFILL.
4.2 GRATE INSTALLATION
A. For the best fl ame performance and least carbon, position the grate as far back as possible. There
should be a 1/4" gap between the grate and the burner valve assembly on the right-side.
B. Secure the grate to burner using the supplied screw.
4.3 CHARCOAL LUMPS/EMBERS
A. Sprinkle the charcoal embers around the front and sides of the burner pan, as indicated on the
diagram below.
B. Place the charcoal lumps on top of the charcoal embers at the front of the media.
NOTE: Do not block air shutter opening with charcoal embers or lumps.
GRATE
GL22
CHARCOAL
W415-1101 / A / 07.24.12
All manuals and user guides at all-guides.com
BURNER PAN
LUMPS
GRATE
1/4"
GL28/GL32
1/4"
AIR SHUTTER
BURNER PAN
(PROPANE
MODELS ONLY)
CHARCOAL
EMBERS