Sony SU-W210 Manuel D'instructions page 6

Step 4: Attach bracket B to the TV
Before attaching bracket B, remove the rear cover of the TV and disconnect all
the cables from the TV.
For how to remove the rear cover of the TV, refer to the Operating Instructions
supplied with the TV.
(The illustrations used in this manual show the KLV-21SR2/KLV-23M1 as
examples.)
Remove the screw s as show n below , and remove the TV
1
stand from the TV.
To prevent damaging the surface of the LCD display, place the TV on a
soft mat.
Soft mat
Notes
• Place the TV body only on the table as shown above. If the TV stand is also on the
table, the TV body may be unstable and cause damage.
• When removing the TV stand, hold it firmly.
Secure bracket B to the TV firmly using the four screw s
2
removed in step 1.
6
Downloaded from:
KLV-21SR2
Remove the four
screw s.
TV stand
Rear of the TV
Rear of the TV
https://www.usersmanualguide.com/
KLV-23M 1
Remove the six
screw s. (M 4 type for
bracket B )
TV stand
Rear of the TV
Soft mat
Bracket B
Remove the tw o
screw s and hinge
cover.
To secure bracket B to
the TV, use the screws
removed from the TV
stand, not the ones
from the hinge cover.