Sony SU-W210 Manuel D'instructions page 11

Insert the locking rod.
2
The locking rod can be inserted from either side. The illustration below
shows an example of how to insert the locking rod from the right side.
1 Insert t he longer side of t he locking rod int o t he holes on bracket
E.
2 Insert t he curved side of t he locking rod int o t he hole on bracket
A. Hold and press t he locking rod at part
t hrough t he hole.
3 Turn t he locking rod unt il it st ops t o secure it in place.
Note
To prevent the locking rod from falling out of the brackets, the
space between both ends of the locking rod is greater than that
between the holes on the brackets. Hold and press the locking
rod at part
Caution
If the TV is lifted up when the locking rod is not installed properly, the TV may fall
off the Wall-Mount Bracket and cause serious injury.
Be sure to insert and secure the locking rod in place.
Downloaded from:
so that it can pass through the holes.
https://www.usersmanualguide.com/
t o pass it s end
1
Locking
rod
3
2
continued
11