Fein ASCD12-100W4 Mode D'emploi page 15

OBJ_BUCH-0000000197-001.book Page 15 Wednesday, August 26, 2015 10:26 AM
en Original Instructions.
Symbols, abbreviations and terms used.
Symbol, character Explanation
Do not touch the rotating parts of the power tool.
Make sure to read the enclosed documents such as the Instruction Manual and the General
Safety Instructions.
Observe the instructions in the text or graphic opposite!
General prohibition sign. This action is prohibited.
Before commencing this working step, remove the battery from the power tool. Other-
wise there may be danger of injury caused by unintentional starting of the power tool.
Use eye protection during operation.
Use ear protection during operation.
Use protective gloves during operation.
Do not charge damaged batteries.
Keep the battery away from fire. Protect the battery against heat, e. g. against continuous
intense sunlight.
Observe the information in the adjacent text!
Additional information.
Gripping surface
Confirms the conformity of the power tool with the directives of the European Commu-
nity.
This symbol confirms the certification of this product for the USA and Canada.
This sign indicates a possible dangerous situation that could cause severe or fatal injury.
WARNING
Recycling symbol: designates recyclable materials
Worn out power tools and other electrotechnical and electrical products should be
sorted separately for environmental-friendly recycling.
Battery type
Weight according to EPTA-Procedure 01
Low speed
High speed
Torque gradient for applications with hard backing, e. g., screws with nuts and washers
(dependent of screw diameter and strength)
Torque gradient for resilient applications, e. g., wheel rims, spring washers, disc springs,
stud bolts, extensions
Torque gradient for applications with soft backing, e. g., wood (dependent of screw diam-
eter and length), lead or fibre discs, packings
(**) may contain numbers and letters
en
15