Publicité
Les langues disponibles
Les langues disponibles
PROBLEM
Nailer operates, but no nail is driven.
Weak drive.
Slow to cycle.
Drives too deep.
Skipping nails.
Intermittent feed.
Nails jam.
Driven nail is bent.
CHECK METHOD
Magazine is dirty.
Check for a jam.
Driver blade worn or damaged?
Ribbon spring weakened or
damaged?
Nail feeder damaged?
Check for proper nails.
Check position of nailing depth
adjustment adjuster.
Driver blade worn?
Compressed air pressure has
become low.
Damaged internal electronics.
Check position of nailing depth
adjustment adjuster.
Check for proper nails.
Nail feeder damaged?
Ribbon spring weakened or
damaged?
Driver blade worn or damaged?
Check for proper nails.
Driver blade worn or damaged?
CORRECTION
Blow and wipe clean the magazine.
Clear a jam (refer to page 30).
Contact Hitachi for replacement.
Replace ribbon spring.
Replace nail feeder.
Use only recommended nails.
Readjust according to page 29.
Contact Hitachi for replacement.
Contact Hitachi for replacement.
Contact Hitachi for replacement.
Readjust according to page 29.
Use only recommended nails.
Replace nail feeder.
Replace ribbon spring.
Contact Hitachi for replacement.
Use only recommended nails.
Contact Hitachi for replacement.
English
33
Publicité
